Peltier Cooler

Compare
  • Model: TEC1-12706
  • Size: 40mm x 40mm x 4mm
  • Operates from 0~15.2V DC and 0~6A
  • Operates Temperature: -30℃ to 70℃
  • Max power consumption: 60 Watts
  • These devices must be used in conjunction with a heat sink to avoid burned
  • Each device is full inspected and tested
  • Fitted with 6-inch insulated leads

৳ 200.00

Description

Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. The Thermal Tape listed below works very well to attach heat sinks to the hot side. This Peltier works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or other block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it.

  • Model: TEC1-12706
  • Size: 40mm x 40mm x 4mm
  • Operates from 0~15.2V DC and 0~6A
  • Operates Temperature: -30℃ to 70℃
  • Max power consumption: 60 Watts
  • These devices must be used in conjunction with a heat sink to avoid burned
  • Each device is full inspected and tested
  • Fitted with 6-inch insulated leads

Reviews

There are no reviews yet.

Be the first to review “Peltier Cooler”

Your email address will not be published. Required fields are marked *